Slide background
Mersin Üniversitesi

Ders Bilgileri

MEASUREMENT AND CONTROL
Kodu Dönemi Teori Uygulama Ulusal Kredisi AKTS Kredisi
Saat / Hafta
MKN 211 Fall 2 0 2 3
Ön Koşulu Olan Ders( ler ) None
Dili en
Türü Required
Seviyesi Associate
Öğretim Elemanı( ları ) Lecturer SERAP ÖZDEMİR
Öğretim Sistemi Face to Face
Önerilen Hususlar None
Staj Durumu None
Amacı Aim of this course is provide ability to measure and control the machine parts.
İçeriği Calipers, Micrometers, Angle measuring instruments and their principles, Surface roughness, Gauges and optical glasses, Shape tolerance control, Size tolerance control,

Dersin Öğrenim Çıktıları

# Öğrenim Çıktıları
1 Measure with calipers and micrometers.
2 Measure the angles.
3 Measure the surface roughness.
4 Perform the screw threads measurements.
5 Perform the cogwheel measurements.
6 Perform surface control with gauges and optical glasses.
7 Perform the control of shape and size tolerance.

Haftalık Ayrıntılı Ders İçeriği

# Konular Öğretim Yöntem ve Teknikleri
1 Calipers operating principles and characteristics, Caliper types according to the measurement systems, Cliper types according to area of usage, Lecture, Application
2 Micrometer operating principles and characteristics, Adjusting the precision of micrometer, Classification of micrometers according to the measurement limits and area of usage, Lecture, Application
3 Optical angle meters, Sinus bar and cylindrical pulleys, Taper measurement calculations, Lecture, Application
4 The concept of surface roughness, Place among the other surface deviations of surface roughness, Surface roughness measurement methods, Lecture, Application
5 Roughness parameters, Roughness standards and calibration of roughness equipmets, Uncertainty analysis for the roughness measurements of workpieces, Lecture, Application
6 Classification of bolts according to the measurement systems, Measuremet of the thread-top diameter and diameter of the bottom thread with caliper or micrometer, Measurement of screw step with screw comb, Lecture, Application
7 Modul prediction according to the thread dimensions, Measurement with the module caliper, Lecture, Application
8 Midterm exam.
9 Set the module caliper according to the prediction Lecture, Application
10 Gauges and gauge types, Measurement errors, Flatness control and interpretation of interference lines with optical glasses, Lecture, Application
11 Define reference surfaces (Pleyts), Squares and airy support points, Control the linearity of the surface, Lecture, Application
12 Control of the surface flatness with the reference gauge, Orthoganality of a surface according to the reference surface according to miter, sentil (liner), comparator, autocollimator, Control of the straightness, flatness and the slope of the plane surface and roundness, taper, stagger and concentricity of cylindrical pieces with comparator, Lecture, Application
13 The reasons for using them tolerance and beat the system, Beat types (strict, transitional, and hollow), Standard terms used for tolerances in Turkey, Lecture, Drilland practice
14 Design principles for the gauge used for simple applications, Compare with the direct measurement and measurement with gauges, Lecture, Application
15 Gauges used for the control of the tapered holes, Properties of fixed and adjustable gauges (stiffness, weight, profile, conformity) Lecture, Application
16 Final Exam

Resources

# Malzeme / Kaynak Adı Kaynak Hakkında Bilgi Referans / Önerilen Kaynak
1 Genceli, O.F. 2000; Ölçme Tekniği, Birsen Yayınevi.

Ölçme ve Değerlendirme Sistemi

# Ağırlık Çalışma Türü Çalışma Adı
1 0.4 1 1. Mid-Term Exam
2 0.6 5 Final Exam

Dersin Öğrenim Çıktıları ve Program Yeterlilikleri ile İlişkileri

# Öğrenim Çıktıları Program Çıktıları Ölçme ve Değerlendirme
1 Measure with calipers and micrometers. 1͵2͵11͵12 1͵2
2 Measure the angles. 1͵2͵11͵12 1͵2
3 Measure the surface roughness. 1͵2͵10͵11͵12 1͵2
4 Perform the screw threads measurements. 1͵2͵11͵12 1͵2
5 Perform the cogwheel measurements. 1͵2͵11͵12 2
6 Perform surface control with gauges and optical glasses. 1͵2 2
7 Perform the control of shape and size tolerance. 1͵2͵3 2

Not: Ölçme ve Değerlendirme sütununda belirtilen sayılar, bir üstte bulunan Ölçme ve Değerlerndirme Sistemi başlıklı tabloda belirtilen çalışmaları işaret etmektedir.

İş Yükü Detayları

# Etkinlik Adet Süre (Saat) İş Yükü
0 Course Duration 14 2 28
1 Course Duration Except Class (Preliminary Study, Enhancement) 14 0 0
2 Presentation and Seminar Preparation 0 0 0
3 Web Research, Library and Archival Work 0 0 0
4 Document/Information Listing 0 0 0
5 Workshop 4 5 20
6 Preparation for Midterm Exam 1 15 15
7 Midterm Exam 1 1 1
8 Quiz 0 0 0
9 Homework 0 0 0
10 Midterm Project 0 0 0
11 Midterm Exercise 0 0 0
12 Final Project 1 0 0
13 Final Exercise 0 0 0
14 Preparation for Final Exam 1 10 10
15 Final Exam 1 1 1
75

"A World University In The Light of Science and Modernity"