1. Hydroxyapatite Coating on Ti and Ti6Al4V Substrates by using Electrophoretic Deposition Method, Supervisor: Dr. Sabri Altıntaş, Boğaziçi University, Graduate School of Natural and Applied Sciences, Mechanical Engineering Department, İstanbul, Turkey, 2008.

1. Investigation about Porosity Formation at Ductile Iron Castings, Supervisor: Dr. Ahmet Baldan, Mersin University, Graduate School of Natural and Applied Sciences, Mechanical Engineering Department, Mersin, Turkey, 2001.

2020
9. Gümüş, K.; Ustaoğlu, G.; Kara, L.; Ercan, E.; Albayrak, Ö.; Tunali, M. Nano-Hydroxyapatite Airborne-Particle Abrasion System as an Alternative Surface Treatment Method on Intraorally Contaminated Titanium Discs. INTERNATIONAL JOURNAL OF PERIODONTICS & RESTORATIVE DENTISTRY, 2020, 40, 179-187. 450 + 0

http://www.quintpub.com/journals/prd/journal_contents.php?iss_id=1688&journal_name=PRD&vol_year=2020&vol_num=40

Publications_009.pdf

2017
8. Ipekoglu, M.; Nekouyan, A.; Albayrak, O.; Altintas, S. Mechanical characterization of B4C reinforced aluminum matrix composites produced by squeeze casting. JOURNAL OF MATERIALS RESEACH, 2017, 32, 599-605. 750 + 5

http://dx.doi.org/10.1557/jmr.2016.495

Publications_008.pdf


Times Cited: 1

2016
7. Albayrak, O.; Ipekoglu, M.; Mahmutyazicioglu, N.; Varmis, M.; Kaya, E.; Altintas, S. Preparation and characterization of porous hydroxyapatite pellets: Effects of calcination and sintering on the porous structure and mechanical properties. JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS, 2016, 230, 985-993. 850 + 0

http://dx.doi.org/10.1177/1464420715591859

Publications_001.pdf

6. Albayrak, O.; Ugurlu, M. Preparation and characterization of boron doped hydroxyapatite: Effects of boron content and sintering temperature on structure and mechanical properties. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2016, 31, 749-761. 1000 + 0

http://dx.doi.org/10.17341/gummfd.59636

Publications_006.pdf

5. Albayrak, O. Structural and mechanical characterization of boron doped biphasic calcium phosphate produced by wet chemical method and subsequent thermal treatment. MATERIALS CHARACTERIZATION, 2016, 113, 82-89. 1000 + 6

http://http://www.sciencedirect.com/science/article/pii/S1044580316300067

Publications_007.pdf


Times Cited: 1

2013
4. Mahmutyazicioglu, N.; Albayrak, O.; Ipekoglu, M.; Altintas, S. Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams. JOURNAL OF MATERIALS RESEARCH, 2013, 28, 2509-2519. 850 + 20

https://dx.doi.org/10.1557/jmr.2013.187

Publications_002.pdf


Times Cited: 4

2010
3. Albayrak, O.; Altintas, S. Production of "Tricalcium Phosphate/Titanium Dioxide" Coating Surface on Titanium Substrates. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2010, 26, 1006-1010. 1000 + 20

https://dx.doi.org/10.1016/S1005-0302(10)60165-X

Publications_003.pdf


Times Cited: 4

2008
2. Albayrak, O.; El-Atwani, O.; Altintas, S. Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: Effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition. SURFACE & COATINGS TECHNOLOGY, 2008, 202, 2482-2487. 1000 + 356

https://dx.doi.org/10.1016/j.surfcoat.2007.09.031

Publications_004.pdf


Times Cited: 70

2007
1. Albayrak, O.; Oncel, C.; Tefek, M.; Altintas, S. Effects of calcination on electrophoretic deposition of naturally derived and chemically synthesized hydroxyapatite. REVIEWS ON ADVANCED MATERIALS SCIENCE, 2007, 15, 10-15. 950 + 25

Publications_005.pdf


Times Cited: 5

2019
1. ÖZBAY, E.; ÇÖMELEKOĞLU, Ü.; VAYISOGLU, Y.; ALBAYRAK, Ö.; BOZDOĞAN ARPACI, R.; DEMİRBAĞ, B.; DENİZ, D.; TALAS, D. Cochlear electrophysiology and histopathology of rats exposed to intratympanic silica nanoparticles. JOURNAL OF RESEARCH IN PHARMACY, 2019, 23, 1115-1122. 135 + 0

http://dx.doi.org/10.35333/jrp.2019.76

Publications_011.pdf

2020
3. İpekoğlu, M.; Nekouyan, A.; Albayrak, Ö.; Altıntaş, S. Effect of BN Addition on the Mechanical Properties of B4C/Al Hybrid Composites Produced via Squeeze Casting Method. CUKUROVA UNIVERSITESI MUHENDISLIK-MIMARLIK FAKULTESI DERGISI, 2020, 35, 669-678. 150 + 0

https://muhendislik.cu.edu.tr//storage/Dergi/(35-3-2020)/10.pdf

Publications_013.pdf

2. SAKALLI, V.; ÇÖMELEKOĞLU, Ü.; ALBAYRAK, Ö.; AVCI, A. YILAN TÜRLERİ ARASINDAKİ MORFOLOJİK FARKLILIKLARIN SAPTANMASINDA YILAN GÖMLEKLERİNİN KULLANILABİLİRLİĞİNİN ARAŞTIRILMASI. ESKISEHIR TEKNIK UNIVERSITESI BILIM VE TEKNOLOJI DERGISI C- YASAM BILIMLERI VE BIYOTEKNOLOJI, 2020, 9, 26-34. 150 + 0

http://dx.doi.org/10.18036/estubtdc.537292

Publications_012.pdf

2019
1. Albayrak, Ö.; İpekoğlu, M.; Altıntaş, S. Investigation of the effects of production parameters on the hydroxyapatite powder properties and coating quality. CUKUROVA UNIVERSITESI MUHENDISLIK-MIMARLIK FAKULTESI DERGISI, 2019, 34, 243-255. 200 + 0

https://dergipark.org.tr/tr/pub/cukurovaummfd/issue/53277/704239

Publications_010.pdf

1. Albayrak, O.; Altıntaş, S. Bioceramic Coating on Metallic Substrates, ISBN: 978-3-639-37121-5, VDM Verlag Dr. Müller, Number of print: 1, Total Printing Number: 100, 82 Page, English, Saarbrücken, Germany, 2011. 250

1. Tunalı, M.; Kasnak, G.; Kucukodaci, Z.; Albayrak, O.; Ercan, E.; Cebi, D.; Ozdemir, H., Is nanohydroxyapatite enhances osseointegration by a better platelet activation?. 25th Annual Scientific Meeting of the European Association for Osseointegration, 2016-09-29, 2016-10-01, Paris, France, 2016. 100
http://www.eao-congress.com/

4. Bolskis, E.; Adomaviciute, E.; Stanys, S.; Jankauskaite, V.; Albayrak, O., Electrospun materials from poly (vinyl alcohol) nano-microfibers with undoped and boron doped hydroxyapatite particles. Biomedical Engineering 2016: 20th International Conference, 2016-11-24, 2016-11-25, Kaunas, Lithuania, 2016. 100
Scientific_Meetings_010.pdf

3. Albayrak, O.; İpekoğlu, M.; Mahmutyazıcıoğlu, N.; El-Atwani, O.; Altıntaş, S., İzostatik olarak preslenmiş ve sinterlenmiş nano ve mikron-altı boyutlarda hidroksiapatit tozlarının yoğunlaşma ve bozunma davranışı. 10th International Conference of the European Ceramic Society, 2007-06-17, 2007-06-21, Berlin, Germany, 2008. 180
Scientific_Meetings_004.pdf

2. Albayrak, O.; Çaylı, G.; İşçi, S.; Altıntaş, S., Nanoboyutta hidroksiapatit sentezlenmesinde çökeltme sıcaklığı ve süresinin etkilerinin incelenmesi. 13. Uluslararası Metallurji & Malzeme Kongresi, 2006-11-09, 2006-11-12, İstanbul, Turkey, 2006. 190
Scientific_Meetings_002.pdf

1. Albayrak, O.; İpekoğlu, M.; Öncel, C.; Altıntaş, S., Doğal ve sentetik olarak üretilen hidroksiapatitin elektroforez yöntemi ile titanyum ana-yapı üzerine kaplanması. 13. Uluslararası Metallurji & Malzeme Kongresi, 2006-11-09, 2006-11-12, İstanbul, Turkey, 2006. 190
Scientific_Meetings_003.pdf

2. Sürmegözlüer, O.; Değirmenci, E.; Albayrak, Ö.; Uysal, Y.; Gönen, B.; Karakuzulu, A.; Yalçın, O., Ar-Ge çalışması kapsamında kablosuz veri aktarımı yapabilen kan basıncı ölçüm cihazı geliştirilmesi (prototip ürün). 16th International Eastern Mediterranean Family Medicine Congress, 2017-05-11, 2017-05-14, Adana, Turkey, 2017. 55
Scientific_Meetings_014.pdf

1. Albayrak, O.; Baldan, A., T-kesitli GGG40 ticari küresel grafitli dökme demirlerde porozite oluşumunun azaltılması. 11. Uluslararası Metallurji & Malzeme Kongresi, 2002-06-05, 2002-06-09, İstanbul, Turkey, 2002. 100
Scientific_Meetings_001.pdf

4. Yakıcı, A.; Hanzade, H.; Değirmenci, E.; Albayrak, Ö., Çok hazneli otomatik ilaç kutusu tasarımı. 2nd International Mediterranean Science and Engineering Congress (IMSEC2017), 2017-10-25, 2017-10-27, Adana, Turkey, 2017. 65
Scientific_Meetings_011.pdf

3. Karakuzulu, A.; Değirmenci, E.; Albayrak, Ö., Bluetooth tabanlı yakın alan takip ve uyarı cihazı tasarımı ve gerçeklenmesi. 2nd International Mediterranean Science and Engineering Congress (IMSEC2017), 2017-10-25, 2017-10-27, Adana, Turkey, 2017. 100
Scientific_Meetings_012.pdf

2. Özbay, E.; Çömelekoğlu, Ü.; Vayısoğlu, Y.; Bozdoğan Arpacı, R.; Albayrak, Ö.; Demirbag, B.; Talas, D., Effects of Silica Nanoparticles on Auditory System. International Congress of Health and Environment, 2017-10-23, 2017-10-25, Adana, Turkey, 2017. 40
Scientific_Meetings_013.pdf

1. Tunali, M.; Kasnak, G.; Kucukodaci, Z.; Albayrak, O.; Aydinbelge, M.; Akman, S.; Firatli, E., A Novel Biomimetic Platelet Concentrate: Hydroxyapatite Platelet-Rich Fibrin (HA-PRF). 94th General Session & Exhibition of the IADR (International Association for Dental Research), 2016-06-22, 2016-06-25, Seoul, South Korea, 2016. 50
https://iadr2016.zerista.com/event/member?item_id=4658633

3. Bolskis, E.; Adomaviciute, E.; Stanys, S.; Baranauskaite, J.; Bernatoniene, J.; Albayrak, O., The analysis of structure of electrospun nonwoven material with hydroxyapatite particles. MPNS COST Action MP1301, NEWGEN (New Generation Biomimetic and Customized Implants for Bone Engineering) Zlin Workshop and WG Meeting on Hydrogel /Biomineralized Biomaterial for Bone Tissue Regeneration, 2016-11-15, 2016-11-16, Zlin, Czech Republic, 2016. 20
http://newgen.utb.cz/

2. Albayrak, O.; Ezan, E., The Effects of the Different Boron Sources on Formation of Boron Doped Biphasic Calcium Phosphate. International Mediterranean Science and Engineering Congress, 2016-10-26, 2016-10-28, Adana, Turkey, 2016. 50
http://imsec2016.org/

1. Uğurlu, M.; Albayrak, O., Preparation and characterization of boron doped biphasic calcium phosphate bioceramics. Materials Today Asia 2014, 2014-12-09, 2014-12-12, Kowloon, Hong Kong, 2014. 50

1. Güven, O.; Albayrak, O., Sürtünme tahrikli serbest sarma sisteminin modellenmesi. 10. Ulusal Makina Teorisi Sempozyumu, 2001-09-12, 2001-09-14, Konya, Turkey, 2001. 100
Scientific_Meetings_005.pdf

8. Graphene Oxide Synthesis by Modified Hummers Method and Investigation of the Effect of Parameters in Synthesis Nitrogen Doped Graphene from Graphene Oxide by Hydrothermal Method., BAP, Project Number: 2018-3-TP2-3038, 11000 TL, Manager, Continue... 100

7. Investigation of the Effects of Production Parameters on Microwave Assisted Graphene Synthesis, BAP, Project Number: 2018-3-TP2-3037, 11000 TL, Manager, Continue... 100

6. Determination of the Effects of Particle Size and Microwave Time on Eco-Friendly Graphene Synthesis by using Microwave Supported Tour Method, BAP, Project Number: 2018-1-TP2-2788, 11000 TL, Manager, Continue... 100

5. Production of Boron Doped Biphasic Calcium Phosphate Powders: Effects of Sintering Time, BAP, Project Number: 2015-AP3-1379, 19966 TL, Manager, 2018,Completed. 100

4. Production and characterization of boron doped hydroxyapatite, TÜBİTAK, Project Number: 213M621, 59688 TL, Manager, 2015,Completed. 100

3. Production and characterization of zinc doped hydroxyapatite with antibacterial property, BAP, Project Number: BAP-FBE MMB (SÇÇ) 2013-3 YL, 9997 TL, Manager, 2014,Completed. 100

2. Formation of bioceramic films on Ti6Al4V substrates by hydrothermal crystallization method, BAP, Project Number: BAP-FBE MMB (GMŞ) 2012-8 YL, 9999 TL, Manager, 2013,Completed. 100

1. Production of nanosized hydroxyapatite (HA) and coatings on Ti6Al4V substrates: Effects of production parameters on particle size and morphology, HA stability, and coatings quality, BAP, Project Number: BAP-MÜH F MM (ÖA) 2010-5 A, 24987 TL, Manager, 2012,Completed. 100

9. Investigation of the effects of some nanoparticles on the stomatal behavior in barley (Hordeum vulgare L.) , BAP, Project Number: 2017-1-AP1-2236, 23997 TL, Researcher, 2019,Completed. 50

8. Herkes için yeni nesil çocuk takip ve uyarı cihazı, Bilim, Sanayi ve Teknoloji Bakanlığı, Project Number: 1303.TGSD.2015, 99860 TL, Researcher, 2016,Completed. 0

7. Histological and electron microscopic investigation of hydroxyapatite and doped-hydroxyapatite, BAP, Project Number: BAP-TF CTB (MCE) 2013-3 TU, 19997 TL, Researcher, 2014,Completed. 50

6. Development of production techniques of advanced materials: (Bio)ceramic coating on metallic substrates by electrophoretic deposition method, and production of metal foams, projects.kurumlar.12, Project Number: 03K120250, 475000 TL, Researcher, 2010,Completed. 0

5. Production of nanosized hydroxyapatite with antibacterial characteristics and coating it on metallic surfaces, TÜBİTAK, Project Number: 107M556, 275277 TL, Researcher, 2010,Completed. 50

4. Production of hydroxyapatite with antibacterial properties, Bogazici Universitesi BAP, Project Number: 08HA601D, 10000 TL, Researcher, 2010,Completed. 0

3. Production of hydroxyapatite nanopowders by chemical precipitation method, and coating on titanium substrates, Bogazici Universitesi BAP, Project Number: 07A602, 16275 TL, Researcher, 2010,Completed. 0

2. Bioceramic hydroxyapatite coating on metallic substrates by the method of electrophoresis, Bogazici Universitesi BAP, Project Number: 05A601D, 15600 TL, Researcher, 2006,Completed. 0

1. Decreasing powder size of naturally derived hydroxyapatite by mechanical methods, Bogazici Universitesi BAP, Project Number: 04A603, 6900 TL, Researcher, 2005,Completed. 0

1. Albayrak, . ; Altıntaş, S. Hydroxyapatite coating on metallic substrates by the method of electrophoresis, Patent, 2012-02-21. 1000
Patents_002.pdf

2. Albayrak, . ; Güvenç, Y. ; Acar, M. ; Kültür, A. ; Altıntaş, S. Electrophoretic Deposition and Dip Coating Apparatus, Patent, 2013-07-22. 1000
Patents_001.pdf

10. Hasan Gündüz, Production of textile waste added polyethylene matrix composites and investigation of the mechanical properties of them, Graduate School of Natural and Applied Sciences, Mersin University, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/giris.jsp

9. Ece Ezan, The Effect of Sintering Time on Structure and the Mechanical Properties in the Production of Boron Doped Biphasic Calcium Phosphate, Graduate School of Natural and Applied Sciences, Mersin University, 2019, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/giris.jsp

8. Seda Oğuz, Production of Boron Doped Biphasic Calcium Phosphate by Solid State Method: The Effects of Boron Content and Ball Milling Time on Structure and the Mechanical Properties, Graduate School of Natural and Applied Sciences, Others, 2019, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/giris.jsp

7. Vedat Atak, Determination of the Effect of Calcination and Zinc Rate in Zinc Additive Nano Sized Hydroxyapatite Production with Solid-State Method, Graduate School of Natural and Applied Sciences, Others, 2019, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/giris.jsp

6. Gül Kaya, Investigation of the effect of production parameters on microwave assisted reduced graphene oxide synthesis, Graduate School of Natural and Applied Sciences, Mersin University, 2019, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/giris.jsp

5. Şeyma Gülnaz Yarlılar, Investigation of Biocompatibility of Boron Additive Biphasic Calcium Phosphate, Graduate School of Natural and Applied Sciences, Others, 2019, Completed. 150
https://tez.yok.gov.tr/UlusalTezMerkezi/giris.jsp

4. Mesut Hanzade, Effect of Mechanical Properties and Structure on the Size and Proportion of Urea in Porous Hydroxyapatite Production, Graduate School of Natural and Applied Sciences, Mersin University, 2018, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/giris.jsp

3. Mustafa Uğurlu, Production and Characterization of Boron-doped Hydroxyapatite, Graduate School of Natural and Applied Sciences, Mersin University, 2015, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp

2. Süleyman Çınar Çağan, Synthesis and Characterization of Zinc-doped Antibacterial Hydroxyapatite, Graduate School of Natural and Applied Sciences, Mersin University, 2015, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp

1. Görkem Muttalip Şimşek, Formation of Bioceramic Film Layer on Ti6Al4V Substrate by Hydrothermal Crystallization Method, Graduate School of Natural and Applied Sciences, Mersin University, 2013, Completed. 200
https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp

1. JOURNAL OF CHEMICAL ENGINEERING AND MATERIALS SCIENCE , PUBLICATION BOARD MEMBER, ISSN : 2141-6605, E-ISSN : 2141-6605, 2011-04-20 - Continue. 250

1. ADVANCED POWDER TECHNOLOGY , [ 2017 : 1 ] [ 2016 : 1 ] . 10

2. ACTA BIOMATERIALIA , [ 2016 : 1 ] . 5

3. ACTA METALLURGICA SINICA , [ 2013 : 2 ] . 8

4. ADVANCED POWDER TECHNOLOGY , [ 2016 : 2 ] . 10

5. BIOMEDICAL MATERIALS , [ 2008 : 1 ] . 5

6. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A , [ 2007 : 1 ] [ 2008 : 1 ] [ 2009 : 1 ] . 15

7. JOURNAL OF CHEMICAL ENGINEERING AND MATERIALS SCIENCE , [ 2011 : 1 ] . 4

8. JOURNAL OF MATERIALS RESEARCH , [ 2013 : 1 ] . 5

9. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , [ 2009 : 1 ] [ 2010 : 1 ] [ 2011 : 1 ] [ 2012 : 3 ] [ 2013 : 1 ] [ 2014 : 2 ] [ 2015 : 1 ] [ 2016 : 1 ] . 55

10. JOURNAL OF MATERIALS SCIENCE: MATERIALS IN MEDICINE , [ 2014 : 1 ] . 5

11. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY , [ 2012 : 1 ] . 5

12. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , [ 2015 : 1 ] . 5

13. MATERIALS SCIENCE ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , [ 2009 : 1 ] [ 2010 : 1 ] [ 2011 : 4 ] [ 2012 : 8 ] [ 2013 : 7 ] [ 2015 : 2 ] [ 2016 : 1 ] . 120

14. MATERIALS SCIENCE AND ENGINEERING C - MATERIALS FOR BIOLOGICAL APPLICATIONS , [ 2008 : 1 ] [ 2010 : 2 ] [ 2011 : 5 ] [ 2012 : 9 ] [ 2013 : 4 ] [ 2014 : 0 ] [ 2015 : 2 ] [ 2016 : 2 ] . 125

15. MATERIALS SCIENCE AND ENGINEERING: A , [ 2009 : 1 ] [ 2012 : 2 ] [ 2013 : 5 ] [ 2015 : 1 ] . 45

16. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART B: JOURNAL OF ENGINEERING MANUFACTURE , [ 2009 : 1 ] . 5

17. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE , [ 2007 : 1 ] [ 2008 : 1 ] . 10

18. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART H: JOURNAL OF ENGINEERING IN MEDICINE , [ 2007 : 2 ] [ 2008 : 3 ] [ 2010 : 1 ] [ 2011 : 1 ] [ 2009 : 1 ] . 40

19. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS , [ 2015 : 1 ] . 5

20. SURFACE & COATINGS TECHNOLOGY , [ 2007 : 3 ] [ 2008 : 2 ] [ 2009 : 1 ] [ 2010 : 3 ] [ 2011 : 1 ] [ 2012 : 3 ] . 65

21. USAK UNIVERSITY JOURNAL OF MATERIALS SCIENCE , [ 2015 : 1 ] . 4

1. Nano Today: An International Rapid Reviews Journal, 2008-10-07, Singapur, Singapore. 100

1. TÜBİTAK, 2008-02-17, İstanbul, Turkey. 0

2. TÜBİTAK, 2010-12-23, Mersin, Turkey. 0

3. TÜBİTAK, 2016-04-09, Mersin, Turkey. 0

1. Türk Seramik Derneği , Member No: 2139, Turkey, 2007-06-06-Continue.

3. European Materials Research Society , Member No: 000, France, 2006-06-06-Continue.

2. TMMOB Makina Mühendisleri Odası , Member No: 47961, Turkey, 1999-04-09-Continue.

4. The American Society of Mechanical Engineers , Member No: 5821442, United States of America, 1996-06-06-Continue.